Engineer Charming A Girl

• I won't stop bugging you until I get the address of your home.
• You fascinate me more than the Fundamental Theorem of Calculus.
• Since distance equals velocity times time, let's let velocity and time approach infinity, because I want to go all the way with you.
• My love for you is like a concave up function because it is always increasing.

Series DC Motor Calculation

The Example Shows the Calculations done for Series DC Machines:

 The Solution: 

Funny Maths Solution

This is what a student wrote when he was clueless about how to go about the question.

Separately Excited DC Machine Calculations

The Long example captures most of the required calculations on a separately excited DC Machine

Short Engineering Joke

Chief engineer: You told me that you would finish the layout in three days.
Engineer: Sure, but not three consecutive days!

The engineer then comes in to talk to his chief engineer. 

Engineer: "I'm having trouble with that power supply circuit you put me to work on."
Chief engineer:"OK, let's talk about it,  Is it oscillating?
Engineer: "No,it is stable."
Chief engineer:"How is the efficiency?"
Engineer: "About 87%"
Chief engineer:"Is there ringing on the gate?"
Engineer: "Nothing above normal."
Chief engineer:"What about noise and ripple?"
Engineer: "They are well within spec."
Chief engineer:"Then what's the problem?"
Engineer: "The darn thing's on fire!"

© Copyright Mark W. Lund 2008 combined with © Copyright 2013 Mark W. Lund

Joke- Electrical Engineering Interview

INTERVIEW

Subject: Electrical Engineering

Interviewer: Why is a thicker conductor necessary to carry a current in A.C. as compared to D.C. ?

Candidate: An AC current goes up and down (drawing a sinusoid) and requires more space inside the wire, so the wire has to be thicker.

Interviewer: How will you tell if that wall outlet carries AC or DC ?

Candidate: I will put my finger in. If it is pushed away, it is DC. If it gets stuck, it was AC.

Interviewer: How will you reverse direction of an induction motor?

Candidate: I will remove the four bolts at the base, turn the motor around, and put back the bolts.

Interviewer: How do you start a synchronous motor?

Candidate: Vrrrrrrrmmmmmmmmmmmmmmmmmmm (in rising pitch)

Interviewer: Stop! Stop!

Candidate: rrrrrrrmmmmmmmmmmmmmmmmmmmm (in falling pitch)

Interviewer: How do you limit surge current within an integrated circuit?

Candidate: By using a miniature circuit breaker.

INDUCTION MOTOR SPEED CALCULATIONS

The example shows how to calculate motor speed given slip and other parameters:

AC Motor Formulae

These are the basic formulae used in AC motor calculations:

Electric Motor Losses

Electric Motors- Types

Electric Motors- principle of operation

Magnetic Field Strength- A Level Physics

Example:  

In the figure below, determine the point (other than at infinity) at which the total electric field strength is zero.

From the diagram, it can be observed that the point where E is zero lies on a straight line where the charges lie, to the left of the -2.5 μC charge.

Let this point be a distance r from the left charge.

Since the total electric field strength is zero,

E_6μ = E_-2μ

[6μ / (1 + r)²] / 4πε_or² = [2.5μ / r²] / 4πε_or² (Note: negative sign for -2.5 μC has been ignored here)

6 / (1 + r)² = 2.5 / r²

√(6r) = 2.5 (1 + r)

r = 1.82 m

The point lies on a straight line where the charges lie, 1.82 m to the left of the -2.5 μC charge.

Faraday's Law

Faraday's law

Question: A plane circular loop of conducting wire of radius cm which possesses  turns is placed in a uniform magnetic field. The direction of the magnetic field makes an angle of  with respect to the normal direction to the loop. The magnetic field-strength  is increased at a constant rate from T to T in a time interval of s. What is the emf generated around the loop? If the electrical resistance of the loop is , what current flows around the loop as the magnetic field is increased?
 
Answer: The area of the loop is 

The component of the magnetic field perpendicular to the loop is 

where  is the magnetic field-strength. Thus, the initial magnetic flux linking the loop is 

Likewise, the final flux linking the loop is 

The time rate of change of the flux is 

Thus, the emf generated around the loop is 

Note, incidentally, that one weber per second is equivalent to one volt.
According to Ohm's law, the current which flows around the loop in response to the emf is 

Fleming's Left hand rule - Motor Effect

A current carrying conductor experiences a force if it is placed in a magnetic field.  The direction of the force is found using Fleming's left hand rule. The force is proportional to: The current; The strength of the magnetic field ; The length of wire within the magnetic field. The formula relating the three quantities is:   F = BIl [B – magnetic field strength; I – current in A; l – length in m] The term B is called the magnetic field strength, or the flux density, and is measured in Tesla, T.  The magnetic flux density can be thought of as the concentration of field lines.   Example: A current of 8.5 A flowing through a magnetic field is found to exert a force of 0.275 N.  The length of wire in the magnetic field is 5 cm.  What is the value of the magnetic field?

Formula first:  F = BIl.

Þ B =  F  = ___0.275 N ___ = 0.647 T          Il       8.5 A ´ 0.05 m

Maxwell's right handed screw/ Cork Screw rule

The figure shows the screw rule used to determine the direction of the magnetic field in a current carrying conductor. It states that if a right hand screw is screwed into or out of a board, the direction in which it rotates is the direction of the magnetic field around the current carrying conductor if the direction of motion of the screw is the direction of current in the conductor.
This can be used to verify the right hand grip rule.

The right hand grip rule for magnetic field around current carrying conductor.

The diagram clearly explains the use of the right hand grip rule.

Electromagnetics Constants

These are the constants used in electromagnetic theory. However, different authors use different symbols but the symbols given above are the standard symbols.

Ten 'Fun and Exciting' Facts About Engineering

From space exploration to the water slide, engineering makes our lives more 'fun and exciting.'

DID YOU KNOW THAT...

1. The snowboard was invented by an engineer? 
   With some engineering twists and turns along the way, the snowboard has become a marvel of geometry, chemistry, and biomechanics. Since the snowboard allows deft turns, ski manufacturers have quickly adopted some of the snowboard innovations, enabling skiers to turn with less effort.
2. Engineers design running shoes for protection, performance, and comfort? 
   Engineers understand how much force travels from the ground through the shoe to the foot. Through the work of engineering, weight is distributed throughout the whole foot -- heel to toe.
3. A civil engineer created the slippery part of the water slide? 
   A civil engineer designed a pumping system to circulate just the right amount of water to the flume. Without the right flow of water, there is no ride. Additionally, civil engineers have designed the slide to withstand the weight of people, the water, and even the force of the wind blowing on it.
4. The launch and return of spacecraft, from the Apollo to the Shuttle, is a monumental engineering triumph? 
   The space program has greatly expanded the world's knowledge base. The technological advancement by engineers in energy, communications, materials, structures, and computers, have made space travel possible.
5. The Ferris Wheel is considered one of the greatest engineering wonders in the world? 
   The first Ferris Wheel was created by Pittsburgh, Pennsylvania engineer, George W. Ferris, in 1893. The wheel is supported by two 140-foot steel towers and connected by a 45-foot axle -- the largest single piece of forged steel ever made at that time.
6. Engineers make interactive television possible? 
   Engineers are involved in all aspects of interactive TV technology, from designing new cables, to creating new film emulsions, to engineering better sound quality. This technology allows viewers to select any program, film, or game from more than 500 channels.
7. Engineers play an instrumental role in the theme park industry? Theme park engineers are involved in designing, building, lighting, and even controlling the crowd flow in theme parks around the world.
8. Companies and universities are using engineers to form the Virtual Reality and Simulation Initiative? This technology applies computer simulation and visualization to 3-D modeling projects, such as virtual offices.
9. Bioengineers are creating a new and exciting medical technology?  This technology will utilize virtual reality to help surgeons reconstruct facial birth defects.
10. Computer engineers, in conjunction with animators, have created special effects in movies such as "Jurassic Park," "Forrest Gump," and "Interview with the Vampire"?  Through "morphing" technology, images are digitally mastered to appear realistic.

Sources:
Baine, Celeste. The Fantastical Engineer. Farmerville, LA: Bonamy Publishing, 2000.
http://www.apegga.com/ (Nike(r) Neers)
http://www.discoverengineering.org/ 
http://www.greatachievements.org/
http://www.inventors.about.com/

- See more at: http://www.nspe.org/resources/media/resources/ten-fun-and-exciting-facts-about-engineering#sthash.wDgEgbG3.dpuf

Circuit analysis using Nodal Analysis Method

The aim of nodal analysis is to determine the voltage at each node relative to the reference node (or ground). Once the voltages are known, currents can be easily calculated.

The analysis follows the following steps:
(1) Pick any node as the voltage reference. Label its voltage as 0 V or the ground. Any value calculated is with respect to this ground or 0 V level.
(2) If any fixed voltage sources are connected to a labelled end, label their other ends by adding the value of the source onto the voltage of the labelled end.
(3) Pick an unlabelled node and label it with  X, Y, . . . or any other convention like V1, V2,..., then go back to step (2) until all nodes are labelled.
4) Use KCL to label determine the currents
5) Use the currents and the resistances in KVL to determine the nodal voltages.

The Following example show how to use the analysis method.

Electrical Circuit Analysis using Mesh Analysis

The node method or the node voltage method, is a very powerful approach for circuit analysis and it is based on the application of KCL, KVL and Ohm’s law. The procedure for analyzing a circuit with the node method is based on the following steps.
1. Clearly label all circuit parameters and distinguish the unknown parameters from the known.
2. Identify all nodes of the circuit.
3. Select a node as the reference node also called the ground and assign to it a potential of 0 Volts. All other voltages in the circuit are measured with respect to the reference node.
4. Label the voltages at all other nodes.
5. Assign and label polarities.
6. Apply KCL at each node and express the branch currents in terms of the node voltages.
7. Solve the resulting simultaneous equations for the node voltages

The following example illustrates the method.

Cape Town Winter Morning Pictures

The morning starts with a very cold breeze. That guy from Cape Town beats the cold with his woolen hat. Here the train comes to an unexpected stop and passengers are stuck in the cold.

The unfortunate thing is that the train stops before reaching the platform. The expectant passengers are still stuck in the cold.

Only those heading towards the Winelands are under threat. Others are running normally.

Passengers cant help but just look at their transporter stuck there

The impatient passengers leave the train to find other ways of going to work. They can not wait because of the cold.

That guy shows it all. But that does not stop the sun from rising.

The cold even divides the sun into its rainbow colours. What a beautiful sight.

A distance away, the mountain tops show that indeed its cold. A close look shows the snow at the mountain top.

This is Stellenbosch. One of the richest places in the Western Cape.

A day in the life of an Engineering Student

That is how your life runs as an Engineer. Back to business after this.

Have a great Week.